Welcome To ZENVA

Medical equipment manual oxygen manifold set automatic gas manifold for hospital

Short Description:

The oxygen manifold is a device for centralized charging or supply of gas. It connects multiple cylinders of gas to the manifold through valves and ducts so that these cylinders can be inflated at the same time; or after being decompressed and stabilized, they are transported to use by pipelines. Special equipment in the site to ensure that the gas source pressure of the gas appliance is stable and adjustable, and to achieve the purpose of uninterrupted gas supply. The applicable media of the gas manifold include helium, oxygen, nitrogen, air and other gases, which are mainly used in industrial and mining enterprises, medical institutions, scientific research institutions and other units with large gas consumption.


Product Detail

Product Tags

What’s the oxygen manifold?

Gas Manifold is a system equipment that transfers several cylinders after grouping together and then conveyed through the main pipe to the use terminal.

It is mainly used in small and medium gas supply stations and other applicable places.

According to the different switching modes of the left and right cylinders, they can be divided into three kinds: manual switching, pneumatic (semi-automatic) switching and automatic switching

Performance characteristics

1.Manual switching gas manifold

1.Manually switch the gas supply on both sides, suitable for bottled gas.

2.The manifold pipe is made of high quality copper material, and the system is subjected to pressure test, safe and reliable.

3.It has bottle and acoustooptic alarm function and remote pressure alarm function. It is easy and reliable to operate.

4.The pipe is connected by silver welding, which can prevent leakage effectively.

5. Open structure design can increase and decrease the number of gas cylinders

Application of gas: oxygen, nitrogen, carbon dioxide and nitrous oxide

2. Pneumatic (semi-automatic) switching gas manifold

1. Semi automatic switching depends on pressure difference to achieve the function of gas transfer. After each switch, the pressure on both sides should be readjusted.

2. The manifold pipe is made of high quality copper material, and the system is subjected to pressure test, safe and reliable.

3. It has bottle and acoustooptic alarm function and remote pressure alarm function. It is easy and reliable to operate.

4.The pipe is connected by silver welding, which can prevent leakage effectively.

5.Open structure design can increase and decrease the number of gas cylinders.

6.Application of gas: oxygen, nitrogen, carbon dioxide and nitrous oxide

3.Automatic switching gas manifold

1. Designed for automatic switching between two gas sources, suitable for bottled gases.

2.With decompression device and over pressure discharge device, ensure stable output pressure and use safety.

3. It has bottle and acoustooptic alarm function and remote pressure alarm function. It is easy and reliable to operate.

4. The pressure indicator can be a clear indication of both sides of cylinder outlet pressure and pressure value of total exports

5. Equipped with gas filtration device, it can effectively block impurities in gas.

6. The whole system is tested through pressure, safe and reliable, and has obtained People's Republic of China medical device registration certificate.

7. Application of gas: oxygen, nitrogen, carbon dioxide and nitrous oxide

manifold
Manual manifold

What is the pillow plate used for?

automatic manifold

Mainly used

Industrial and mining enterprises,

Medical institutions,

Large gas-consuming units such as scientific research institutions

Automatic Switching Gas Manifold

Parameter
Rated inlet pressure 15MPa
Rated outlet pressure 0.6MPa (0-1.6MPa adjustable)
Rated flow 100 cubic meters per hour
Use medium oxygen, nitrogen, compressed air, laughing gas, carbon dioxide and mixed gas and other non-corrosive gases
Automatic switching pressure 1±0.1MPa
Empty bottle alarm pressure 1±0.1MPa
Imported overpressure alarm pressure adjustable, factory set value: 16.5MPa
Outlet overpressure alarm pressure adjustable, factory setting value: 0.6MPa
Outlet underpressure alarm pressure adjustable, factory setting value: 0.4MPa
Alarm signa Sound and light alarm, and can be connected externally
Power supply voltage 220V/50HZ
Power consumption ≤15W
Connection thread at the outlet end M33X2 (standard paired with copper or stainless steel welding adapter) 

Our product show made by pillow plates

Our product show. (1)
Our product show. (2)

  • Previous:
  • Next:

  • Write your message here and send it to us